March Group of Seven Cardmakers - Technique: Embossed Gilding Flakes

 It's time for the March Group of Seven Cardmakers Post!  This month we are playing with the Embossed Gilding Flakes technique.

Here are the two cards I created.  

This card uses the debossed panel.

I bought these Museum Bust Fancy dies from Hero Arts after Kent and I went to the King Tut Show in Boston last year.  I used the classic busts on these cards but the set includes two Egyptian busts as well.  I think they worked perfectly with the panels I created using the gilding flakes!

This card uses the embossed panel.

The black panels are embossed with Lumen Embossing Folder from Simon Says Stamp.

I die cut the statues out of Distress Woodgrain Card and then rubbed Lost Shadow Distress ink lightly over them to try to simulate marble.

Here are a few process photos creating the embossed gilding flakes panels.

I covered 2 panels of white card stock with Stick It, a double sided adhesive sheet.

I removed the top of the Stick it Sheet from the card panels and laid the panels, sticky side up, inside a pizza box to help contain the flying of the gilding flakes!  I spread the Autumn Gilding Flakes over the panels and pressed it onto the panel with my fingers.  Then I brushed the gilding flakes off with a stiff brush.  

Note:  She uses 3 colors of gilding flakes on the video but my Autumn Flakes are already a mix of colors so I just used that.

I took the gilded panels and put them together with the gilding flaked sides facing out and placed them inside the 3D Texture Fades Botanical folder from Sizzix.  Then I ran the embossing folder through my Big Shot twice to give a good impression.  That gave me an embossed panel and a debossed panel.

(The white line and spots on the panels below are places the double sided adhesive paper didn't stick- I colored over those spots with a gold metallic pen.)

I die cut arches out of the panels using A2 Arches from the Greetery.  

The final step is to rub a black ink over the panels.  On the embossed panel it hits the raised image and on the debossed panel it hits the background.  

Note:  The tutorial says to use a permanent ink like StazOn or Archival -  but I found those inks made the panels very sticky and it never seemed to dry, maybe due to whatever the flakes are made of?? maybe my inks were old?  Anyway, I decided to make two new panels.

So after trying ALL my various kinds of black inks unsuccessfully (ie they all felt sticky), I tried Memento Tuxedo Black ink and that seemed to dry. I also noticed that all the black inks seem to fade a little as they sit on the flakes.

You will find a link to a YouTube video with this technique over at The Group of Seven blog.

So please check out the rest of the Seven's creations, and if you decide to give this technique a try please link your card up over at The Group of Seven Blog! 

I'm interested to hear what black ink you were successful with on the embossed gilded panels!

I'm also linking my card to:

Time Out Challenges

my sentiment Make each day your masterpiece.

Die Cut Divas - Anything Goes 

die cuts

Path of Positivity

anything goes

Stamps:  Motivational Center Mona Lisa Moments - Cornish Heritage Farms (retired)

Ink:  Memento Tuxedo Black, Ranger Lost Shadow Distress (rubbed over statures), Versamark.

Paper:  White Distress Woodgrain Card - Tim Holtz/Ranger, white and True Black - Papertrey Ink,  Metallic Gold - Parklane/JoAnn.

Accessories:  Stick It Double Sided Adhesive Sheets, Autumn Leaves Gilding Flakes - Cosmic Shimmer, Fancy Dies Museum Busts - Hero Arts, A2 Arches die - The Greetery, 3D Texture Fade Botanical Embossing Folder - Tim Holtz/Sizzix, Lumen Embossing Folder - Simon Says Stamp, Gold Embossing Powder (for sentiment), heat tool